Posts: 1
Joined: Mon Jun 20, 2016 6:33 pm

Printing on M3D Pro

Sun Dec 10, 2017 8:54 pm

According to the printer compatibility page, Simplefy3D has a configuration for the M3D Micro Pro. So it seems, but does anyone know how to print the output gcode on the Pro? I've tried several ways but they all disconnect once the hotend reaches temperature. Thanks.

Posts: 1
Joined: Sun Dec 24, 2017 12:30 pm

Re: Printing on M3D Pro

Sun Dec 24, 2017 12:33 pm

Thinking about buying this for my M3d Pro as well.., Is it working can I print directly or do I need to SD card it?

Posts: 1
Joined: Tue Apr 17, 2018 10:31 pm

Re: Printing on M3D Pro

Wed Jun 26, 2019 9:32 pm

I have the same problem...
I try conect Simplify to printer, without succes.
I try export gcode and send to printer throgh the M3d Software. fail again.

Posts: 6
Joined: Wed Jan 09, 2019 11:15 am

Re: Printing on M3D Pro

Mon Jul 08, 2019 10:35 am

We also bought this for a machine that was "Supported" a SINDOH WOX3D1. In the end we could only load onto the SD card and print that way. IMHO it defeated the whole purpose of paying 150.00 for a piece of software. So what they consider "Supported" might not be what you think.

Because we used a hard network connection we could not use the soft to directly print files. They had to be transferred to an SD card.

Return to “Troubleshooting and Bug Reports”