Re: [FEATURE REQUEST] - Infil Patterns
I'll go ahead and throw my name in this request as well
Re: [FEATURE REQUEST] - Infil Patterns
Definitely +1
This is the ONLY short-coming that the software has that is severe enough that I cannot fully recommend the software to other makers. It's always "I DO really like the software, BUT be aware that you only get one infill pattern :/"
I'm almost embarrassed when people ask me if I would recommend the software and I have to tell them that I paid $150 for software that can't do what open-source freeware does.
This is the ONLY short-coming that the software has that is severe enough that I cannot fully recommend the software to other makers. It's always "I DO really like the software, BUT be aware that you only get one infill pattern :/"
I'm almost embarrassed when people ask me if I would recommend the software and I have to tell them that I paid $150 for software that can't do what open-source freeware does.
Re: [FEATURE REQUEST] - Infil Patterns
Some russian science (diplom) work with infil patterns and preassure tests.
http://3dtoday.ru/blogs/leoluch/add-sci ... -printing/
p.s. STEEL NEED Different infil patterns
http://3dtoday.ru/blogs/leoluch/add-sci ... -printing/
p.s. STEEL NEED Different infil patterns
Wanhao Duplicator 4X DH
-
leonpotgieter
- Posts: 9
- Joined: Sun May 31, 2015 11:07 am
-
DarthRevan
- Posts: 480
- Joined: Wed Feb 18, 2015 8:29 am
Re: [FEATURE REQUEST] - Infil Patterns
THEY DID IT! 3.0! 
Re: [FEATURE REQUEST] - Infil Patterns
As mentioned, many new infill patterns were added in the latest 3.0 release. They included grid, honeycomb, triangular, wiggle, and the old rectilinear. There is also a new option to print multiple infill angles on the same layer for extra strength. For example, this could print both a -45 and +45 infill pattern on the same layer. You can find these options on the Infill tab.
