Simplify3D 3.0 introduced a bunch of changes, and therefore the previous thread on this subject (tip of the day 22), is no longer valid. The profiles attached have been optimized and revised, they include <Extruder> tags which will allow for easy configuration of extruders. In the past if you have a CubePro trio and wanted to only use two extruders, you would use the CubePro Duo profile. With these new profiles, you would use the CubePro trio printer profile and then just select the Extruder choice selection for "Extruders 1 and 2 only" in the FFF Settings window. Another new addition here is that there is now a Mac converter for BFB to CubePro files, which is very helpful.
For 3D Touch, CubeX, Rapman printers.
1) Download .Zip file below [/b]
2) Go to File-->Import FFF Profile and import the FFF profile for your printer.
3) Configure Simplify3D and then slice and use the Save Toolpaths to Disk button to save your .BFB file.
4) Transfer this .BFB file to Flash Memory-->Plug in Flash Memory to printer and start the print!
For CubePro printers
Download the converter for your computer:
Codex 32 converter:
https://www.dropbox.com/s/q17jwj104d7qy ... 2.exe?dl=0
Codex 64 converter:
https://www.dropbox.com/s/snpmkood7u4s5 ... 4.exe?dl=0
Codex for MAC Converter (NEW):
https://www.dropbox.com/s/94v7bf1vneme5 ... x.zip?dl=0
1) Download .Zip file below [/b]
2) Go to File-->Import FFF Profile and import the FFF profile for your printer.
3) Configure Simplify3D and then slice and use the Save Toolpaths to Disk button to save your .BFB file.
4) Open the Codex converter and have it selected to "CubePro" for the printer, and function set to "EnCode", then pick your newely saved .BFB file. The converter will create a .CubePro file
5) Transfer this .CubePro file to Flash Memory-->Plug in Flash Memory to printer and start the print!
Troubleshooting:
**Please ensure that you are using Simplify3D 3.0.0 or newer with these profiles**
**If you'd like to change the speed of your print, you can change the Default Print Speed value under the Other tab, but also be sure to change the Extrusion rate by changing the M108 S value in the Starting Script of the Scripts tab. It should be the last line in the Scripts tab.**