when during printing i change the extruder multiplier in the Machine control panel.
from 100% to 94% then after some time the extruder stops (no plastic)
the preset for extrusion multiplier was 130%.
-
petertesla
- Posts: 5
- Joined: Fri Feb 12, 2016 5:48 am
-
CompoundCarl
- Posts: 2005
- Joined: Wed Aug 05, 2015 7:23 am
Re: extruder speed adjustment error
If plastic stops coming out, it's probably not because of the flow rate modifier. It's most likely a jam or something like that.
