LulzBot TAZ 5 .5 mm nozzle profile
We need a profile for the LulzBot TAZ 5 with the .5 mm nozzle. Thanks.
Re: LulzBot TAZ 5 .5 mm nozzle profile
Try this FFF for a .5mm nozzle if printing with ABS. You'll need to pick the Layer Height (LH) in "Material" drop down. Then from the "Quality" find the same LH and pick whichever speed.
So for delicate figurines or detailed prints, choose LH2 and SPEED4200 for a .2mm layer height and slow 4200 mm/min print speed. For fast prototype printing, use LH3 and SPEED5400.
Hope it works for you.
So for delicate figurines or detailed prints, choose LH2 and SPEED4200 for a .2mm layer height and slow 4200 mm/min print speed. For fast prototype printing, use LH3 and SPEED5400.
Hope it works for you.
- Attachments
-
- TAZ5-N5_20151219_01.txt
- Rename .txt to .fff
- (45.06 KiB) Downloaded 348 times
-
- TAZ5-N5_20151219_00.fff
- (43.95 KiB) Downloaded 373 times
Last edited by KC_703 on Fri Apr 22, 2016 12:05 am, edited 1 time in total.
Re: LulzBot TAZ 5 .5 mm nozzle profile
I agree this would be very welcome
