Supporting different temperatures for 2-in 1-out nozzle

[alcam]

Simplify3d makes it easy to print with 2-in 1-out nozzle, having setting to retract on tool change, accommodating different designs.
The request is to add per-filament temperature setting (e.g. when printing PETG at 240 and PVA at 200), so that the print head would wait somewhere at prime pillar while the temperature needed for the new filament is stabilized.

[brian442]

I think you can do this already using the tool change scripting that they allow. Just move to a specific location anytime there is a tool change, then use the {IF NEWTOOL} commands to choose what M109 temperature to set.
viewtopic.php?f=8&t=1959