Post Reply
mstein
Posts: 9
Joined: Sat Mar 31, 2018 3:03 pm

100% infill but still not completely full infill

I set 100% infill, but still it is not completely filled on top. Why?

Attached a screenshot of slicing and the settings.

Thanks.
Attachments
settings.png
100_infill.png
mellons
Posts: 10
Joined: Wed Apr 04, 2018 3:43 am

Re: 100% infill but still not completely full infill

Can you upload a picture of your Advanced Settings too, please.
User avatar
dkightley
Posts: 2405
Joined: Tue Mar 10, 2015 4:09 pm

Re: 100% infill but still not completely full infill

Increase the Infill overlap to something like 80% and change the Minimum Infill Length to zero. The small cylindrical top should then fill.
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net
mstein
Posts: 9
Joined: Sat Mar 31, 2018 3:03 pm

Re: 100% infill but still not completely full infill

Great! That was the solution. Thanks!
Post Reply

Return to “Troubleshooting and Bug Reports”