vangalvin
Posts: 11
Joined: Sat Aug 20, 2016 6:27 pm

Mouse Ears to stop warping.

When printing ABS I was having a lot of issues with parts warping, mostly the outer walls or a corner. The fix was prety simple. I now add an 8mm circle 1.2mm high that is offset from the part no more that 1mm and attached to the part with a 2mm wide tab. These are easy to snap/cut off then sand down and as a result I have prety much eliminated any warping issues.

Image

Now this would be a great feature to add to Simplify3D. It's much the same idea as adding tabs when making things on the CNC.
Calimaus
Posts: 2
Joined: Fri Jun 29, 2018 11:36 pm

Re: Mouse Ears to stop warping.

+1
inventabuild
Posts: 86
Joined: Sat Mar 19, 2016 12:29 pm

Re: Mouse Ears to stop warping.

+1
Trialon
Posts: 4
Joined: Tue Jul 24, 2018 4:34 am

Re: Mouse Ears to stop warping.

Good idea.
ryaske
Posts: 7
Joined: Fri Jul 06, 2018 3:31 pm

Re: Mouse Ears to stop warping.

+1 Great idea, I would love this feature
ivanhandler
Posts: 4
Joined: Sat Feb 04, 2017 4:40 pm

Re: Mouse Ears to stop warping.

I agree
cybrsage
Posts: 54
Joined: Sun Aug 06, 2017 8:46 pm

Re: Mouse Ears to stop warping.

Agreed

Return to “Feature Requests”