Hi all,
I preset S3D with the provided CTC Bizer profile and everything works as expected, except of one thing: The build volume/Y-Axis starting point.
S3D somehow thinks, that the build volume on the Y-Axis is only 140mm, but the CTC has a 150mm build plate. So what happens is that the starting point of the print head is 10mm offset starting at 140mm instead of 150mm.
I tried to change the build volume in the preferences and change the offset. However in the preview mode the starting line is still drawn 10mm offset. How can I fix this and why is this profile incorrect?
Thanks a lot!