Faurholdt
Posts: 2
Joined: Sat Feb 16, 2019 1:52 pm

Change layer direction on bottom layer

Sat Feb 16, 2019 1:59 pm

Hello
I want to change the angle on the bottom layer to 45 degree lines instead of 90 degree lines
How is this done? Thanks.

It's shown in the attached picture :shock:
Attachments
First_layer.JPG

gearsawe
Posts: 141
Joined: Sun Sep 10, 2017 11:06 pm

Re: Change layer direction on bottom layer

Fri Feb 22, 2019 1:19 pm

Is this a raft layer, support layer, interior fill or exterior fill? they can all be be changed in each of there designated area. Look at infill and support tabs.

User avatar
dkightley
Posts: 2060
Joined: Tue Mar 10, 2015 4:09 pm

Re: Change layer direction on bottom layer

Fri Feb 22, 2019 6:32 pm

The infill showing in the screen print looks very much like the bottom layer of the printed part.

The "External Infill Angle" on the Infill tab has its first (or only) value set to either zero or 90. Changing the value to 45 will give you what you desire.
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net

Faurholdt
Posts: 2
Joined: Sat Feb 16, 2019 1:52 pm

Re: Change layer direction on bottom layer

Sun Feb 24, 2019 6:46 am

Thank you for the replies. It is sorted out now. Time to print :P

Return to “Troubleshooting and Bug Reports”