Hi. I'm sure I'm just doing something stupid, but S3D is not reporting or logging the temperatures (nozzle and bed) from my CR-10s pro. I'm using the latest v4.1 on ubuntu 14.04 with the printer connected over USB and the CR-10s pro profile selected. I can see the temperature read lines in the comms window, but this does not seem to be recognised. What am I doing wrong? Has anyone else had this problem? It worked fine with my old CTC?
Cheers
Andy
-
rementicule3d
- Posts: 2
- Joined: Tue Apr 19, 2016 5:07 pm
Re: CR-10s pro temperatures not read
i have the same problem with my cr-10s pro. I try tu use the Tiny machine firmware but no change
Re: CR-10s pro temperatures not read
Thanks for reporting this! Can you also post an example of the feedback sent by the printer?
"A bird does not sing because it has an answer. It sings because it has a song."
Re: CR-10s pro temperatures not read
READ: ok ==T:238.00 /238.00 ==B:79.72 /80.00 @:80 B@:127
SENT: G1 X105.626 Y45.453 F2334
READ: ok
SENT: G92 E0.0000
SENT: G1 E-7.4000 F4200
READ: ok ==T:238.00 /238.00 ==B:79.70 /80.00 @:80 B@:127
READ: ok
SENT: G1 X105.626 Y45.453 F2334
READ: ok
SENT: G92 E0.0000
SENT: G1 E-7.4000 F4200
READ: ok ==T:238.00 /238.00 ==B:79.70 /80.00 @:80 B@:127
READ: ok
Re: CR-10s pro temperatures not read
Exact same issue here.
Tried various printer FW - no change.
Tried various printer FW - no change.
