wirlybird
Posts: 1215
Joined: Sun Jul 17, 2016 1:32 pm

Full Fan for Last Layer of Dense Supports.

Thu Apr 25, 2019 7:20 am

This is kind of an unusual request!

Here is the situation. I find that when using PETG I rarely use the cooling fan. Especially for larger parts since layer bonding is more important for me.
I do find however that if I use the fan full on for the last layer of a dense support then back off for the first layer of the part that goes over the dense support I get very good support removal.

My idea would be to have the option of having the fan come on or ramp up to a selected speed for the top layer of dense support but only while it is printing the actual support and not for the entire layer of the print.

I would find this useful for PETG and ABS. If you cool that last layer of dense support then you don't get quite as much adhesion from the layer going on top of it make separation better.

S3D-Jake
Posts: 601
Joined: Wed Jun 20, 2018 12:45 pm

Re: Full Fan for Last Layer of Dense Supports.

Wed May 15, 2019 1:15 pm

Thanks for this is a very specific feature request. Our team will be keeping an eye on this. Can you think of any other areas/feature types that would benefit from fan setpoints being feature specific? This could introduce a whole new level of control for users when making custom material profiles for their printers.
"A bird does not sing because it has an answer. It sings because it has a song."

Ayres3D
Posts: 86
Joined: Mon Aug 14, 2017 1:15 pm

Re: Full Fan for Last Layer of Dense Supports.

Thu May 16, 2019 10:15 am

That sounds like a really interesting idea which makes a lot of sense. I may have a play with that using processes to see what difference it makes.

Return to “Feature Requests”