Printing PETG at 240 degrees
You can see though that where the text is on the headband it seems to print much better
-
CTR_Developments
- Posts: 1
- Joined: Sun Apr 12, 2020 4:30 pm
Strange Sidewall issues
I have searched through the guides but have not been able to solve this issue. IT seems that on think parts the printer print s very nicely. again on thick parts all is good. However if I have a part that is around 2mm I get really weird sidewall 'patterns'. I have tried printing at lower temps and reducing the extrusion multiplier. I have checked the e steps and its bang on
Printing PETG at 240 degrees
You can see though that where the text is on the headband it seems to print much better
Printing PETG at 240 degrees
You can see though that where the text is on the headband it seems to print much better
