skirt should print at same speed as all other first layer elements
The skirt apparently uses the infill speed to print, and is not configureable. This is a request to have the skirt honor the first layer print speed, and/or have it's own speed setting.
Re: skirt should print at same speed as all other first layer elements
The skirt does use the default print speed as its base for assigning a print speed. The first layer underspeed setting from the Layer tab does apply to the skirt's first layer. This is seen quite easily in the resulting G-Code. If you're having issues with seeing the print speed updated according to the first layer speed modifier please attach your print file.
"A bird does not sing because it has an answer. It sings because it has a song."
Re: skirt should print at same speed as all other first layer elements
I found this is annoying as our defualt speed is 200mm/s,the sskirt /brim is really under a unstable conditioon.we know we can change it in the gcode but it could be natraul to set it the same as the first layer speed.
