Hi everyone
I'm using S3D already for years by now. Every once in a while you get problems to achieve correct GCodes
I’m using one of my selfmade printers working with Duet 2 Wifi.
The attached STL file I cannot slice so that i get it run.
The original File comes from a guy who sells 3D-planes to print.
He says that only Cura can slice this file to get the correct GCode.
Do you have an idea where the problem ist o be located? Can you get it sliced an get a GCode?
I tried now for over 2 days but no result.
I would appriciate if you can help me out.
And great thank you for your efforts.
Martin
STL file cannot sliced correctly
- Attachments
-
- WINGTEST_Manual_EN.pdf
- (1.4 MiB) Downloaded 106 times
-
- WINGTEST_profile3.stl
- (223.67 KiB) Downloaded 92 times
Re: STL file cannot sliced correctly
This model appears to be a single, open surface, rather than a valid, manifold STL.
The following links explain these issues in more detail and provide specific suggestions for how to fix them:
https://www.simplify3d.com/support/tuto ... sh-errors/
viewtopic.php?f=8&t=3177
The main issue is that I believe that these models were created this way on purpose, to trick the slicer into slicing them a certain way, which will not work on Simplify3D without extensive tweaks and workarounds.
The following links explain these issues in more detail and provide specific suggestions for how to fix them:
https://www.simplify3d.com/support/tuto ... sh-errors/
viewtopic.php?f=8&t=3177
The main issue is that I believe that these models were created this way on purpose, to trick the slicer into slicing them a certain way, which will not work on Simplify3D without extensive tweaks and workarounds.
