Posts: 1
Joined: Tue Nov 05, 2019 3:42 pm

Layer fan trouble starting even with "blip fan" enabled

I have a noctua 40x40x20 as a layer fan. I've set it up that on the first layer the fan is 0%, second 35%, 5th 60%.
Ive been having trouble that the fan tries to spin up on the second layer but doesn't have enough juice at 35% to get started. (you do see it nudge a little, if I help it a bit it does start)
So I turned the "blip fan to full power when increasing from idle" but that doesn't help.
Does anybody have any Idea how to tackle this?
any help would be greatly appreciated.

Return to “Troubleshooting and Bug Reports”