blj1884
Posts: 45
Joined: Mon Jan 30, 2017 8:34 am

Please add Skirt/Brim setting for internal regions. (See Attached)

Please add Skirt/Brim setting for internal regions. (See Attached)
Attachments
Screenshot_20230105_101129.png
S3D-Jason
Posts: 1383
Joined: Sun May 31, 2015 6:01 am

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

Would a simple checkbox to enable the internal skirt/brim be enough? Or do you think it needs fully independent settings compared to the outer skirt/brim?
dibor
Posts: 16
Joined: Sun Jan 02, 2022 8:57 am

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

Preferably 3 states, internal, external and both. :)
gearsawe
Posts: 233
Joined: Sun Sep 10, 2017 11:06 pm

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

I run into this problem when a part with a large internal opening then place a couple small part inside the opening. Those smaller inside the large opening don't get a brim. this might solve that issue. Have even tried 2 processes and still does not work
3D-Diel
Posts: 1
Joined: Fri Jun 23, 2023 5:11 pm

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

dibor wrote: Wed Jan 11, 2023 3:46 am Preferably 3 states, internal, external and both. :)
I vote for this. adding Brim would be nice and 3 states would be awesome

At the Moment when I am trying to add brim only to a part of the model its impossible to work the way it is (setting the distance for skirt to zero), because some parts are just to near and then S3D will do a skirt with distance
cbann
Posts: 1
Joined: Tue Aug 15, 2023 7:01 am

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

This is also important for my workflow. Variability between internal and exernal brim settings would be great but I'd be happy for a tick box just to have internal brims added.
3d001
Posts: 6
Joined: Mon Jul 20, 2015 12:06 am

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

I think this is a necessary feature.
inner, outer
zemlin
Posts: 431
Joined: Mon Feb 01, 2016 11:36 am

Re: Please add Skirt/Brim setting for internal regions. (See Attached)

If using an ooze shield, the brim gets added to the shield and not the part - so one for the ooze shield, model external, model internal would be lovely.

Return to “Feature Requests”