SgtJon
Posts: 13
Joined: Fri Sep 15, 2023 12:04 pm

Temp Control For Dremel 3D45

I just tried to adjust the Bed Temperature for the 3d45, but the machine is reporting a temperature 10 degrees
cooler than what I requested. Is this a software bug or am I doing something wrong?
S3D-Jason
Posts: 1340
Joined: Sun May 31, 2015 6:01 am

Re: Temp Control For Dremel 3D45

We actually have several 3D45 machines here as well. I just tested a print on one of the machines using V5.1.2 and the bed temp heated to the correct value without issue. Can you try re-downloading the stock settings that we provide for the machine (Help > Configuration Assistant)?
S3D-Taylor
Posts: 6
Joined: Tue Jun 20, 2023 10:55 am

Re: Temp Control For Dremel 3D45

Hi, can you use the touch screen interface of the printer, go to Tools->Setting->Adv. Mode->Turn ON "Prioritize G-code settings". If this settings was OFF, the default material properties will override the setting set by Simplify3D. Please let me know if it works for you.

Return to “Troubleshooting and Bug Reports”