I use v.3.0.2.
I tried to get this bug on other computer and lucky found additional condition for it.
Process must be set at vase mode and extrusion width must be exactly 0.50mm as I mentioned above.
-
pipaev
- Posts: 22
- Joined: Thu Dec 24, 2015 7:17 am
- Location: Russia, Moscow, Zelenograd, skype: pipaev
Re: Extrusion multiplier resetting to 50x
- Attachments
-
- Кубик 20.stl
- (684 Bytes) Downloaded 196 times
-
- Кубик 20.factory
- (3.28 KiB) Downloaded 179 times
P.S. Sorry for my English. Greetings from Russia!
-
jorisjanssen
- Posts: 5
- Joined: Mon Feb 22, 2016 10:40 am
Re: Extrusion multiplier resetting to 50x
I also experience this bug. Perfectly reproducible on 2 different computers (vase with 0.5 mm extrusion).
