pwalker4
Posts: 1
Joined: Wed Jan 24, 2018 3:09 pm

End Script not working

Tue May 15, 2018 10:54 am

When a print finishes the hot end just sits where it stops printing, usually still in contact with the object. Do I have to enable the start and end scrip's some how?

G28 X10 ; home X-axis
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M84 ; disable motors[quote

Thank you for any help

greybeard
Posts: 60
Joined: Mon Mar 02, 2015 1:23 pm

Re: End Script not working

Mon May 21, 2018 2:13 pm

G28 is 'Home All'. You're confusing it by adding X10.

You want to use G1:

G1 X10

airscapes
Posts: 131
Joined: Tue Mar 06, 2018 10:35 am
Location: Philadelphia PA Area

Re: End Script not working

Mon May 21, 2018 3:57 pm

This is what is in the default end scrip for MakerGear M2
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
G91 ; relative mode
G1 Z10 ; lift 10mm
G90 ; absolute mode
G28 X0 ; home X axis
M84 ; disable motors

Return to “General Discussion and Tips”