Page 1 of 1
4.1.1 Crashes
Posted: Tue Dec 18, 2018 6:02 am
by HJ Visions
After updating to newest 4.1.1 version software keeps crashing after hitting "Prepare to Print". It does it evere time If .stl is over 10Mb. Before updating and other slicers there is no such problem.
Re: 4.1.1 Crashes
Posted: Tue Dec 18, 2018 3:36 pm
by S3D-Jake
Can you please include your factory file and some generic details about your operating system and computer's specifications? Our team hasn't seen this issue in our office, so we may need to attempt to replicate more closely the hardware and operating system you're using.
Saving a factory file: File > Save factory file as...
Re: 4.1.1 Crashes
Posted: Tue Dec 18, 2018 3:56 pm
by wirlybird
I'll try to send one also but I am having the same issue. Hit prepare to print and S3D vanishes. Only Ver. 4.1.1 has done this, never used 4.1 so don't know if it did it also.
Re: 4.1.1 Crashes
Posted: Tue Dec 18, 2018 5:09 pm
by tonyno
It's not happening with particular files for me, but all happen after working with them after a time. I'll post more as I find it.
Re: 4.1.1 Crashes
Posted: Mon Mar 18, 2019 6:19 pm
by ibkozi
I am having the same problem. Any STL over 10 MB and Simplify3d will crash when preparing to print.
Re: 4.1.1 Crashes
Posted: Fri Mar 22, 2019 7:16 pm
by ibkozi
PC Specs are:
MB = Gigabyte Aorus Ultra
CPU = Intel I5 9600k
GPU = Nvidia Gforce RTX 2070 OC
RAM = Gskill 3200 DDR4 32GB
HDD = Samsung SSD 860 EVO 1TB
Windows 10 Pro
Re: 4.1.1 Crashes
Posted: Fri Mar 22, 2019 7:25 pm
by ibkozi
I had it crash on me today on a small retraction test file. It had 6 profiles. The factory files only changed retraction and the height of print.