Infill gaps to perimeter issue

[roscop13]

Hello,

I'n a newby, and got ainfills gaps to perimeter issue, I identied my issue here http://reprap.org/wiki/Print_Troublesho ... rial_Guide this loorks like this:

http://reprap.org/wiki/File:PTPG-FNT-IG01.jpg

this guide says that it is something to do with the slicer, I think it has something to do with these settings:

http://postimg.org/image/4ualh13cd/

I'm using a flashforge creator X PRO

Thanks a lot for your help