Issue with A10M
Posted: Fri Aug 02, 2019 8:50 am
Hello,
what do you think about this issue during printing the first layer of the print ?
I have A10M Geeetech
Infill: 100%
Extrusion multiplicator: 1,20
Retraction distance: 3mm (1800mm/min)
Thanks in advance.
Sébastien
what do you think about this issue during printing the first layer of the print ?
I have A10M Geeetech
Infill: 100%
Extrusion multiplicator: 1,20
Retraction distance: 3mm (1800mm/min)
Thanks in advance.
Sébastien