tef11
Posts: 6
Joined: Tue Feb 11, 2020 12:44 pm

Hollow object without closed body, slicer adding bottom

Tue Feb 11, 2020 1:01 pm

Hello All -

Brand new to 3Dprinting, and have run some tests with other software. I don't know all the terminology, so forgive my ignorance as I'm learning. Print came out fine but need to print on a larger printer (German RepRap X500). Using this software (which is different from software I used for original print) the slicer is adding a bottom, gaps, and added material. Attached are images of the import in preview mode, and one when prepared for print. Any tips?
Attachments
Screen Shot 2020-02-11 at 12.53.03 PM.png
Screen Shot 2020-02-11 at 12.52.43 PM.png

PicoTreed
Posts: 52
Joined: Mon Jan 14, 2019 10:14 am

Re: Hollow object without closed body, slicer adding bottom

Wed Feb 12, 2020 2:26 am

Hi tef11,
please share wit us your STL, anyway you can try to:

  • export again or fix your STL;
  • play with the "Slicing Behavior" settings in the "Advanced" tab.
R&D for 3D printers, materials & software.

tef11
Posts: 6
Joined: Tue Feb 11, 2020 12:44 pm

Re: Hollow object without closed body, slicer adding bottom

Tue Feb 18, 2020 3:19 pm

Thanks, that worked. On to my next issue...posted recently!

Return to “Troubleshooting and Bug Reports”