restart distance
Posted: Sat Mar 07, 2020 8:35 am
something unclear, retraction is set to 0.7 and restart to -0.2 (so restart also should retract) with 15mm/sec retraction speed
but in gcode I see
isn't G92 E0 missing before each G1 E-0.2000 F900 ?
Code: Select all
...
; extruderRetractionDistance,0.7
; extruderExtraRestartDistance,-0.2
...
; extruderRetractionSpeed,900
...
; toolChangeRetractionDistance,12
; toolChangeExtraRestartDistance,-0.5
; toolChangeRetractionSpeed,600
Code: Select all
...
; layer 1, Z = 0.200
T0
G92 E0.0000
G1 E-0.7000 F900
; feature skirt
; tool H0.200 W0.468
G1 Z0.300 F600
G1 X5.624 Y1.484 F12000
G1 Z0.200 F600
G1 E-0.2000 F900
G92 E0.0000
G1 X5.553 Y1.692 E0.0089 F360
...
...
G92 E0.0000
G1 E-0.7000 F900
; layer 2, Z = 0.400
M106 S255
G4 P500
M106 S128
M104 S230 T0
; feature inner perimeter
; tool H0.200 W0.360
G1 Z0.500 F600
G1 X16.402 Y2.404 F12000
G1 Z0.400 F600
G1 E-0.2000 F900
G92 E0.0000
G1 X16.111 Y2.123 E0.0126 F3420