Dariv
Posts: 2
Joined: Fri Apr 01, 2022 1:23 am

CR-10 Max Freezes in mid air

I'm total noob when it comes to 3D printing, so i have no idea what is going on with this.See the issue on youtube:

https://youtu.be/OawB57d5XrY



Cura G-Code:
Start:
M201 X500.00 Y500.00 Z100.00 E5000.00 ; Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ; Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ; Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ; Setup Jerk
M220 S100 ; Reset Feedrate
M221 S100 ; Reset Flowrate

G28 ; Home
G29 ; Auto bed Level
M107 ; Turn layer fan off
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ; Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ; Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ; Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up
End:

G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
Dariv
Posts: 2
Joined: Fri Apr 01, 2022 1:23 am

Re: CR-10 Max Freezes in mid air

Solved.
Connect printer to your computer, using a terminal program like Pronterface an send M119 to get the status of you end-stops.
Worked once Connected to the PC via USB and run the program. Then the program shows all the errors you can find on YouTube.
Worked for me

Return to “Troubleshooting and Bug Reports”