Al1deR
Posts: 6
Joined: Fri Dec 16, 2022 3:58 pm

Dense support layer / combine support

Would it be possible to set combined support layer independently for "normal" support and dense support.
Indeed, when printing with layer heights >= 0.25 (0.6mm nozzle or more), and combined support layer at 2, the dense support are very bad.
It would be useful to be able to set Combined support layers at 2 and dense support layer at 1
Thanks
Al1deR
Posts: 6
Joined: Fri Dec 16, 2022 3:58 pm

Re: Dense support layer / combine support

S3D, could you please set up independent combined support settings for regular supports and dense supports?
The idea is to be able to set regular combined supports to 2 and dense combined supports to 1, for example.
Thanks

Return to “Troubleshooting and Bug Reports”