Page 1 of 1

Customize Firmware Syntax and Commands

Posted: Tue Mar 14, 2023 7:35 pm
by bcprint3d
Since upgrading to V5 I have been having issues with one of my printers. This printer uses a Duet Board and firmware. In order for the cooling fan and temperatures to be set correctly it need customized commands to be sent to the printer. In V4 I used the menu on the screenshot below to configure this. With the move to V5 this has been removed and thus the PCF and the temperatures are not being set correctly.

I emailed support about this a week ago and have gotten no response. Any help in solving this would be appreciated.
Screenshot 2023-03-06 181353.png