msomuncu
Posts: 1
Joined: Sat Apr 01, 2023 9:48 am

Second outermost perimeter priority

If we could prefer laying the second outer perimeter first for example with 30% of the speed, that would give us better outer perimeter quality by isolating all the higher speed blemishes on the inner perimeters or infills. (I generally print with 3-4 perimeters, inside>out)

So, please add the future if possible to select "second outer perimeter first" and "second outer perimeter speed".

This will prevent reflecting the corner bulging, ringing, etc. on the high speed regions to the outer perimeter without losing overhang performance.

Return to “Feature Requests”