Taz 4 Dual Extruder

[Mudaseem]

Hello!

I recently downloaded 2.2.1 and read that it supports that Taz 4, but I still don't see that on the pull down menu. I have been using the Taz 4 profile and it has been working okay for a few months. Is there supposed to be a Taz 4 tab? I checked to make sure that the update worked and the software tells me it is up to date.

My second question is how do I tell Simplify how far my second extruder is from the original? I am using the Flexy Dually from Lulzbot and read the support manuals of how to achieve multi-color prints; and Simplify seems to be controlling the two heads properly, but still mis-prints the distance between two extruders (because Simplify has no way of knowing).

Thanks,
Marek

[KeyboardWarrior]

Try going to Help-->Reset all settings for the profile. For the toolhead offsets, you can add M218 commands to the starting G-Code;

For more information, both of these have more information here:
http://forum.simplify3d.com/viewtopic.php?f=8&t=1949