Support style change or bug

[3dprinterMEI]

Why do the support structures protrude through my part?

How do I change they support style from rectangular or square to follow the contour of the part?

[S3D-Jason]

If your part has very thin walls, then you likely want to use a lower support pillar resolutions to make sure the supports can correctly adjust to the shape. Try lowering the support pillar resolution to 1 or 2mm instead of 4-10mm and see if that solves the problem.

[3dprinterMEI]

Thank I did it worked.

[mariahcarey]

If your part has very thin walls, then you likely want to use a lower support pillar resolutions to make sure the supports can correctly adjust to the shape. Try lowering the support pillar resolution to 1 or 2mm instead of 4-10mm and see if that solves the problem.wordle

This finer resolution allows the supports to conform better to thin walls and intricate details without protruding excessively.