skunkworx
Posts: 1
Joined: Sat Aug 03, 2024 3:22 pm

Creality K1 Max

the installed k1 max profile when print has finished does not lower the bed.

what gcode to i need to add the end script to lower the bed when print is complete

regards
S3D-Jason
Posts: 1524
Joined: Sun May 31, 2015 6:01 am

Re: Creality K1 Max

You can usually lower the bed by just moving to a specific Z position at the end of the print.

For example, if you printer Z height was 200mm, you could just add this in your ending script
G1 Z200 F1800 ; move to Z=200 at 1800mm/min

Return to “General Discussion and Tips”