Simplify3D User Forum

I noticied when playing around with coasting that it produces wrong gcode:

G1 X-11.311 Y8.203 E10.8745
G1 X-10.937 Y8.684 E10.984
G1 X-9.631 Y10.366
G1 X-7.663 Y12.195 E11.0915
G1 X-7.516 Y12.306 E11.0988
G1 E3.0988 F6400
G0 Z1.5 F36000
G0 Z0.5 F36000

instead of stopping extrusion till the retract, it only stops extrusion for one line of gcode where the coasting distance starts!
please fix this

Good catch. I see it in my gcode also:

G1 X78.237 Y105.278 E4.4609
G1 X78.274 Y105.243 E4.5003
G1 X78.849 Y104.687
G1 X79.501 Y104.14 E4.5396
G1 E3.5396 F3600
G0 X101.265 Y110.399 F18000
M105


Have a great day,
Jim

FYI - This has been fixed in version 1.1.5 that will be coming out shortly. Thanks for the report!