Simplify3D User Forum

Hi,

I upgraded to Version 3.0 and now the starting point for prints has shifted from the left side of the printer to the right side.

This causes the nozzle to be up against the build plate when it does its initial extrusion because there is less space on the right side of the printer. I'm on a Flashforge Creator Pro.

How can I shift the starting point back to the left side of the printer?

Thank you,

Alex

Try choosing a starting point like X:0 Y:-150

This is what i changed it too. I have not yet verified it yet and i removed the nozzle purge g code:

G1 X-80 Y-10 Z30 F9000 ; move to wait position right hand side of the table
G130 X20 Y20 Z20 A20 B20 ; lower stepper Vrefs while heating
M126 S[fan_speed_pwm]
M140 S[bed0_temperature] T0
M134 T0 ; stabilize bed temperature
M104 S[extruder1_temperature] T1
M133 T1 ; stabilize left extruder temperature
G130 X127 Y127 Z40 A127 B127 ; default stepper Vrefs
G92 A0 B0 ; zero extruders
G1 Z0.4 ; position nozzle
M135 T1 ; left tool
G1 X-75 Y-10 ; move nozzle
G1 X-65 Y-10 Z0.15 F1200 ; slow wipe
G1 X-75 Y-10 Z0.5 F1200 ; lift

Great! Thank you.