brim feature not split between processes

[danielhenley]

Often when printing multiple objects I want some to have a brim because they need some extra bed adhesion, yet other parts in the same print don't require a brim--including one would just add to cleanup.

S3D "should" be able to do this via it's multiple process feature, but it doesn't--the brim settings on the first process are always used by all parts regardless of what their brim is set to.

Expected: each part uses the brim setting from it's own process.

[MikeConnor821]

+1

[CompoundCarl]

I just did a quick test and had no problems printing 2 objects with 2 processes - one with a brim and one without. It seems to work fine for every test I do.

Do you have a factory file for your specific issue? Maybe it's just an easy setup option you need to adjust

[MikeConnor821]

The top part is sliced correctly with a 3 layer, 44 outline brim. The bottom part is supposed to have a 1 layer, 2 outline skirt, 4mm out. Does the .factory file include the processing settings, etc?
Thanks and Happy Holidays,
mike

[CompoundCarl]

Just separate the models bit more. If they are too close, the skirt for each one will get combined (and thus use the same settings). I just moved then an extra 10mm apart and then it worked.