LulzBot TAZ 5 .5 mm nozzle profile
Posted: Thu Mar 03, 2016 12:15 pm
We need a profile for the LulzBot TAZ 5 with the .5 mm nozzle. Thanks.
Try this FFF for a .5mm nozzle if printing with ABS. You'll need to pick the Layer Height (LH) in "Material" drop down. Then from the "Quality" find the same LH and pick whichever speed.
So for delicate figurines or detailed prints, choose LH2 and SPEED4200 for a .2mm layer height and slow 4200 mm/min print speed. For fast prototype printing, use LH3 and SPEED5400.
Hope it works for you.