Tool change script issues
Posted: Sat Oct 15, 2016 4:34 pm
I have upgraded to dual extruder with single nozzle and having issues with tool change.
T1 is my right nozzle and T0 left which when I try to do dual extrusion from wizard my retracts and starts get all messed up. Below is my tool change script
Total retract from active extruder is 140mm to get filament out of nozzle and up into the 2 in 1 out mixer so the new filament can be pushed in. Then instead of using prime tower I am pushing 50 mm out of active nozzle to purge the old filament. I attaching a copy of the profile i am using if anyone could take a look and help me out I wold appreciate it. I would really like to get this thing working has been driving me crazy for a month now
T[old_tool]
G92 E0
G1 E-50 F9000
G1 E-50 F1000
G1 E-40 F9000
G1 X0 Y40 F2000
T[new_tool]
G92 E0
G1 E140 F9000
G1 E60 F1000
G1 E-10 F9000
T1 is my right nozzle and T0 left which when I try to do dual extrusion from wizard my retracts and starts get all messed up. Below is my tool change script
Total retract from active extruder is 140mm to get filament out of nozzle and up into the 2 in 1 out mixer so the new filament can be pushed in. Then instead of using prime tower I am pushing 50 mm out of active nozzle to purge the old filament. I attaching a copy of the profile i am using if anyone could take a look and help me out I wold appreciate it. I would really like to get this thing working has been driving me crazy for a month now
T[old_tool]
G92 E0
G1 E-50 F9000
G1 E-50 F1000
G1 E-40 F9000
G1 X0 Y40 F2000
T[new_tool]
G92 E0
G1 E140 F9000
G1 E60 F1000
G1 E-10 F9000