RogerWilco486
Posts: 2
Joined: Tue Jul 25, 2017 10:54 am

Re: Request: Firmware Retraction

Mon Jan 07, 2019 11:00 am

OP here, still waiting for this feature.

Eddiie
Posts: 6
Joined: Wed Sep 27, 2017 11:42 pm

Re: Request: Firmware Retraction

Fri Jan 11, 2019 12:17 pm

+100 for a checkbox that does the search/replace behind the scenes.
Why is this so difficult to add this?

alexspeller
Posts: 1
Joined: Wed Jan 23, 2019 5:50 pm

Re: Request: Firmware Retraction

Wed Jan 23, 2019 5:56 pm

I found, at least on the latest version, that the M101/102/103 generated more retracts than would otherwise be the case.

I fixed this by using some bogus retraction settings and replacing that instead, e.g. 0.1mm at 6666mm/min. Make sure not to set Z hop as that will come out as a separate move.

Then I replaced the actual retraction gcodes with this script:

Code: Select all

{REPLACE "G1 E-0.1000 F6666" "G10"}
{REPLACE "G1 E0.1000 F6666" "G11"}
This resulted in 25% less G10 calls in a sample test print, which came out looking better for it.

smoki3
Posts: 13
Joined: Thu Apr 19, 2018 3:28 pm

Re: Request: Firmware Retraction

Wed Feb 13, 2019 3:41 am

1+

Would be great if they can support this

Wallabear
Posts: 4
Joined: Wed Feb 13, 2019 4:33 pm

Re: Request: Firmware Retraction

Wed Feb 13, 2019 4:44 pm

I would really, really, REALLY like to see this feature add as well

Return to “Feature Requests”