Simplify3D User Forum

I want to adjust infill settings based on the print quality. However, if I change Infill extrusion width (or anything else) for the 0,05 preset, it will change every other preset as well (0.35, 0,2 etc.). I want to have different infill settings depending on the layer height/print quality. The only thing that can be changed between the presets is the infill percentage.

There's lots of threads on the forum about how to do this. Go to File > Export FFF Profile, open that file in a text editor, and add the <infillExtrusionWidthPercentage> tag into each <autoConfigureQuality> section. Then save and re-import.