Simplify3D User Forum

hi,

i have 2 printers, a wanhao i3 with .4 nozzle and a reprap i3 with .3 nozzle
S3D 4.0.0 profiles are there for specific printer and is set to the nozzle site
when infill is set to 100% on Wanhao infill is really 100% so that is okay.
When infill is set to 100% on reprap, infill is not 100% more like 90%, what setting should i edit in reprep profile to get real 100% ?

thanks

Try going to the Infill tab and changing the Internal Fill Pattern to Rectilinear

yesss ! that the solution, thanks !