Simplify3D User Forum

currently I manually turn on fan on layers where bridging is happening but that's not ideal, apart from being tedious manual work, I don't want whole layer to have fan on (ABS don't like fan) but only while bridge is printed so it would be cool if we could have something like "override fan speed during bridging" where we can put 0-100 or 0-255 for the fan speed during bridges

I believe this already exists. Cooling tab > enable the checkbox for "Bridging fan speed override" and enter the value you want to use.

damn I'm blind thanks ... the worse part is, I actually checked that same tab if the option is maybe there before I wrote the FR ... getting too old