bobcat
Posts: 2
Joined: Thu May 09, 2019 7:34 pm

Re: Network Printing - Qidi X-Pro

Fri May 10, 2019 11:54 am

wirlybird wrote:
Fri May 10, 2019 10:25 am

Use the profile provided by QIDI. It works fine and in my opinion probably better than a "default" added by S3D.
Thanks. That's precisely what I did, and printed a figure QIDI Print made a mess of. Simplify3D made less of a mess of it. Decided to keep it for the slicer speed and some intriguing automated techniques. The rest of the suite is, unfortunately, useless computer clutter unless and until they find a way to implement network printing.

More to learn...

tenuki
Posts: 3
Joined: Sun Jul 07, 2019 6:59 pm

Re: Network Printing - Qidi X-Pro

Tue Jul 09, 2019 10:18 pm

+1 to network printing to QIDI X-MAX.

tenuki
Posts: 3
Joined: Sun Jul 07, 2019 6:59 pm

Re: Network Printing - Qidi X-Pro

Sat Jul 13, 2019 11:19 pm

I did a thing - it might help in the meantime? Hope it's ok to post here. It's how I'm printing to my QIDI X-Max until simplify includes this feature.

https://github.com/tkuebler/3dWiFiSend

swoop
Posts: 7
Joined: Mon Jul 02, 2018 3:58 pm

Re: Network Printing - Qidi X-Pro

Sat Jul 13, 2019 11:49 pm

They have dev WiFi monitoring app for windows, this is the link their support gave me. It works to preheat, control, monitor, manual move, remote print etc ( with any usb in the printer ) some of the app is in Chinese but i don't care, remote print/stop is great.


We have monitor software ,after you printer connect with network or wifi ,you can use this software.

https://drive.google.com/open?id=1r0iw2 ... iFUSPHwgPP

Our 3d printer can match Simplify3D,but ony use USB Pen drive .

Any doubts,please feel free to contact us.

Dannicus
Posts: 2
Joined: Tue Aug 16, 2016 9:47 pm

Re: Network Printing - Qidi X-Pro

Wed Jul 17, 2019 2:14 am

Adding my name to the group who would like to see network printing capability. I have been using Simplify 3D for 5 years with all of my Qidi Tech 1 printers. The X-Max is the most amazing machine I have ever used/seen. I too am utilizing the FFF profile provided by Qidi imported into Simplify 3D with frankly the best results I have ever achieved in 5 years of doing this full time.

However, without the USB interface on the printer and the lack of network printing capability on S3D it will get old really quick running the thumb drive across the room, not to mention sans the direct communication with the slicer. I suspect you are going to hear this alot from the Qidi X-series users as they really are otherwise amazing machines.

Return to “Feature Requests”