Search found 25 matches

Go to advanced search

by raffo333
Thu Mar 06, 2014 9:26 am
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

Today ive changed my extruders, both broken, now i am on MK9
So i am starting again, i will let you know
Thank you!
Raf
by raffo333
Wed Feb 26, 2014 6:31 am
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

Going back to ABS
This is 19.90x19.90 good accuracy but not such a good build, some issues with the corners
Extr. Multi 1
Extr. Width 0.40
Layer 0.29
Infill 20%
temps 230/110
Random start point
20140226_132144_web.jpg
by raffo333
Wed Feb 26, 2014 4:08 am
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

Ok ! the support team helped allot withe the accuracy, my PLA cube now is 20.00 x 19.95 !!!

In the Firmware selection under x3g tab it was selected replicator 2 and it should be replicator 1

thank you all
Raf
by raffo333
Wed Feb 26, 2014 3:45 am
Forum: General Discussion and Tips
Topic: Wrong extruder
Replies: 13
Views: 3513

Re: Wrong extruder

Solved !

In the firmware section of the S3D it was selectet replicator 2 , and it should be replicator 1 !
by raffo333
Tue Feb 25, 2014 6:41 am
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

OK, ive contacted the support team, i am waiting for their reply
Thank you !
by raffo333
Mon Feb 24, 2014 12:54 pm
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

ok, ive made some tests, and this is BAD, PLA as you told me, 1.0 Multi, but i also used the bed to 60c I can see also some extruder problems .... and the dimensions are also OFF... :cry: Ive made also a Makerware print for comparsion SD3 Print DSC_1782.JPG Makerware Print 10% infill ( much worst pr...
by raffo333
Mon Feb 24, 2014 11:53 am
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

:? Something really strange is happening now, the extruder reaches the 200 temp and starts, and then immediately while is printing the temp decreases
in S3D i see in the temp settings the Temp identifier of the extruder is the same with the bed (TO) is this correct ?
Regards
Raf
by raffo333
Sat Feb 22, 2014 1:57 pm
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

Ok, can you point me to what should i check ? i am using the default rep1 profile with extr.multi.0.75 i didnt changed anything else ,tenps are 220/110
thanks
raf
by raffo333
Sat Feb 22, 2014 10:59 am
Forum: General Discussion and Tips
Topic: Help me Calibrate
Replies: 28
Views: 14000

Re: Help me Calibrate

So scaling is the only way with S3D ? I mean, if i print two parts together that one should fit the other but they dont fit, if i change the scale for the print the problem persist as they both goin to be scaled Raf As jimc said: <once you are getting nice clean prints then pull out the calipers If ...
by raffo333
Sat Feb 22, 2014 10:32 am
Forum: General Discussion and Tips
Topic: ONLY WANHAO DUPLICATOR 4
Replies: 7
Views: 6216

Re: ONLY WANHAO DUPLICATOR 4

Pardon my Italian :)
Ciao Peppe, qual'e il tuo problema ?

Go to advanced search