Great analysis of the source-code. But in my case (Printrbot Simple Metal) I set the heat-bed to 50 °C and extruder to 210 °C, so I'm not hitting a temperature limit, as my heat-bed can go to 90 °C and my extruder can also go higher than 210 °C. So there must be some other problem?

I have a Printrbot Simple Metal and experienced this issue as well - it started somehow with release 3.0. I usually manually pre-heat the bed and extruder (so I can insert the filament and prepare for the print) - when I then hit "print to usb" it sticks either on waiting for printbed-temp or extrud...

Yes, a configuration setting would be nice. Additionally highlighting problem areas in 3D view or in slicer-view could also come handy - but I'm sure this is not very easy to do ;-) I often run into this problem when I start placing text on my 3D designs. I don't have control on the exact font-metri...

Yes, I know, great app - but if there is an official way to implement it (and it's basically only 2 lines of code), why would I need a 3rd party app to just "fix" problems of non-compliant apps.

Yesterday it happened: I started a print job (approx. 45 min) and left my laptop on battery power. Usually it has enough battery to allow for 6+ h of operation. But mid-print the computer went to sleep and therefore my print stalled. Of course I could adjust my energy settings to never sleep - but t...

ClassicGOD wrote:HI,
I decided to create a build platform model for my Printrbot Simple Metal.
You can find my model here: http://www.thingiverse.com/thing:941680

Great! Thanks - hopefully Simplify3D will add your model as default for the Printrbot Simple profile (of course only if you would allow this)

But can't the software be adaptive? E.g. if 10% of the print is already done and it took 20 min instead of the calculated 15 min, Simplify3D should already know it was too optimistic and recalculate based on that. (Most browsers do something similar if you download a large file, the time-remaining i...

+1 Would like to see this fixed as well