SEE ATTACHED PHOTO AND ATTACHED COMMENT
I'm fairly certain this is a software issue. I'm sure the bed is level. I'm sure temperatures are consistent. I'm sure the filament has a clear path to the extruder.
What's happening here? I'm coming from Cura and new to Simplify 3D. Haven't had these issues before.
-
charzander
- Posts: 2
- Joined: Sun Jul 07, 2019 6:39 pm
Re: Bug report: Missing outer layers
There's nothing attached!
Doug Kightley
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net
Volunteer at the National Tramway Museum http://www.tramway.co.uk
Railway modeller and webmaster at http://www.talkingtgauge.net
-
charzander
- Posts: 2
- Joined: Sun Jul 07, 2019 6:39 pm
Re: Bug report: Missing outer layers
Here's the attachment. However I fixed the issue. Turns out I DIDN'T have a clear path for the filament. It would eventually kink and cause layers to be missed. I tried to delete this post but couldn't find the button. Please disregard, thanks 
