Simplify3D User Forum

Hi all!

I have lot of oozing on my creatbot Dx. I tried to use some parameter from creatware, the slicer from creatbot. They set the retraction at 10mm. 10mm works but due to the long pause over the print, I have retraction spot on my prints.

I reduce to 6mm the retraction stringing appear and retraction spots are still present

Temperature of Nozzle: 190

Thanks for your help and sorry for my bad english!

Marc

Why don't you use a faster retraction speed so it doesn't take so long to retract?

You could also use some coasting to help relieve excess pressure in the nozzle before retracting

Hi mate.

I to also have a Creatbot DX 03. And I am having retraction issue printing. Items

What is the best retraction settings you have found.

In creatware. 6mm seems fine. But if I use it in simplify3D I get under extrusion and prints fail.

What's the best settings you have found. I want to print a 3dlabprints RC plane.

Cheers
Mal