Simplify3D User Forum

Code: Select all

j@desktop:/opt/Simplify3D-3.0.2$ ./gpx
Command line error: provide an input file or enable standard I/O
GPX 2.0-alpha Copyright (c) 2013 WHPThomas, All rights reserved.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

Usage:
gpx [-dgilpqrstvw] [-c CONFIG] [-f DIAMETER] [-m MACHINE] [-u NEWSTEPSPERMM] [-n SCALE] [-x X] [-y Y] [-z Z] IN [OUT]

Options:
        -d      simulated ditto printing
        -g      Makerbot/ReplicatorG GCODE flavor
        -i      enable stdin and stdout support for command line pipes
        -l      log to file
        -p      override build percentage
        -q      quiet mode
        -r      Reprap GCODE flavor
        -t      truncate filename (DOS 8.3 format)
        -u      Custom machine settings
        -v      verbose mode
        -w      rewrite 5d extrusion values
CONFIG: the filename of a custom machine definition (ini file)
DIAMETER: the actual filament diameter in the printer

MACHINE: the predefined machine type
        c3  = Cupcake Gen3 XYZ, Mk5/6 + Gen4 Extruder
        c4  = Cupcake Gen4 XYZ, Mk5/6 + Gen4 Extruder
        cp4 = Cupcake Pololu XYZ, Mk5/6 + Gen4 Extruder
        cpp = Cupcake Pololu XYZ, Mk5/6 + Pololu Extruder
        t6  = TOM Mk6 - single extruder
        t7  = TOM Mk7 - single extruder
        t7d = TOM Mk7 - dual extruder
        r1  = Replicator 1 - single extruder
        r1d = Replicator 1 - dual extruder
        r2  = Replicator 2 (default)
        r2h = Replicator 2 with HBP
        r2x = Replicator 2X
        m180 = Maylan M180
        3dimulti = 3Dison Multi
        3dipro = 3Dison Pro
        3dih700 = 3Dison H700

NEWSTEPSPERMM: new axis steps per mm in format: x??y??z??a??b??
        You must first define a base profile with the -m flag.
        Replace ?? with value, for example: x100y100z30a96.5b98
        Leaving an axis out will result in the ommited axis
        retaining base machine value

SCALE: the coordinate system scale for the conversion (ABS = 1.0035)
X,Y & Z: the coordinate system offsets for the conversion
        X = the x axis offset
        Y = the y axis offset
        Z = the z axis offset

IN: the name of the sliced gcode input filename
OUT: the name of the x3g output filename

Examples:
        gpx -p -m r2 my-sliced-model.gcode
        gpx -c custom-tom.ini example.gcode /volumes/things/example.x3g
        gpx -x 3 -y -3 offset-model.gcode
        gpx -p -m r1d -u x86.54z436 my-sliced-model.gcode