Simplify3D User Forum

Posted: **Thu Nov 09, 2017 3:42 pm**

hello, what setting do I have to do to return the Z axis to the home position.
Now when the print ends, the Z axis moves to the right.
Thank you

Posted: **Thu Nov 09, 2017 5:22 pm**

It will be a gcode statement in the Ending script for the process you are using.

Posted: **Sat Nov 11, 2017 6:06 am**

Where I go to see the g-code

Posted: **Sat Nov 11, 2017 1:58 pm**

After importing the model and putting all settings go to
Prepare To Print
this shows the preview of the print and on left side the button
Save Toolpath To Disk

Click this button and a file will be stored on choosen folder.

The File has the extension *.gcode when this format is choosen in the menue >>> Process Setting >> Scripts (if not, change it!)

Alternatively you can copy in menue Scripts the Starting- and Ending Script or better

you attache here your FactoryFile when readed this: https://forum.simplify3d.com/viewtopic.php?f=8&t=2367

H.

Posted: **Sat Nov 11, 2017 4:31 pm**

OK thank you very much

Simplify3D User Forum

Z axis at the end of the print goes to the left and not to t

Z axis at the end of the print goes to the left and not to t

Re: Z axis at the end of the print goes to the left and not

Re: Z axis at the end of the print goes to the left and not

Re: Z axis at the end of the print goes to the left and not

Re: Z axis at the end of the print goes to the left and not