Simplify3D User Forum

kaan

I'm trying to use the CF-XT20 filament, with Robo3D Printer, I have the filament set at ABS, tho I'm sure that setting doesn't change anything It's suggested to use 40-70mm/s extrusion with this filaments, I can't find a setting that allows me to limit the speed Either I have to correlate the X/Y/Z ...

kaan

I used to get awesome prints with a Z-0.05 / -0.07 offset, however, now even with -0.12mm - I get normal prints Considering a layer is 0.2mm - with -0.12mm I should be over-extruding noticeably I'm using a Robo3D R1 with auto-levelling, I guess upgrading to V3 was a huge mistake, the V3 seems better...

kaan

I used to get awesome prints with -0.07mm offset - now even -0.12mm prints normally, so much has changed with the V3 ...

Auto levelling works as expected for me tho, on the contrary, it works so well that I can no longer print into the plate for awesome surface finishes

kaan

Hi everyone, I print pretty much all my prints with a Z -0.05 to -0.1 displacement, which is almost half the layer height, as a result, the object adheres to the print surface well and it also adopts the texture of the blue painter's tape, so it's a win win, the only caveat is that I sometimes manua...

kaan

Thanks for all your help I did manage to get things working with the starting script too M565 Z-1.14 is the value that works for me Setting -1.14 to M565 is like adding an +1.14 Z-offset, If I'm not mistaken, as M565 Z-1 didn't work for me, the extruder was almost carving the tape I updated the firm...

kaan

Turns out MatterControl enables it's own auto leveling procedure before very print, seems like a plot to cover the printr's lack of autoleveling as advertised, because it doesn't auto level with G29, here is the G-code MatterControl generates without the auto leveling, didn't test printing with it y...

kaan

If you post the G-Codes sent by Matter Control I'm sure a few users on the forum will be able to look it over and give good suggestions on what starting script to do. I don't have a Robo3D or use Matter Control, so I don't have access to the Gcode Matter Control is using You are right, finally logg...

kaan

Thanks for the information BaudR8 From the G code, It's clear that there is no G29 command with MatterControl, however the G29 on the machine probes at 9 points as in the Marlin firmware I'm using the default firmware that comes with the device, I'm guessing it's Robo 3D's modification of the Marlin...

kaan

Hi all :) Thanks for the compliment tri-lite, I've improved it a bit since then to be easier to print and managed to print it to perfection with PLA after many trials and errors at different scales I will try that jimc, it sounds logical, as the issue started suddenly, it might have happened after a...

kaan

I've quickly checked Matter Control's Gcode (the machine and setup is in the attic) - it indeed does other things in the background Manually moves to the bed points and runs 3 G30's instead of a G29 (it might be replacing the G29 with those commands as it's Robo 3D integration) I'm guessing replicat...

Search found 16 matches

How can I set the Extrusion Speed?

3.0.1 - Is the Z-offset ignored? (+ V3 Rant)

Re: Robo3D R1 - Autoleveling initiated but not leveling

Smooth first layer feature - Smart over extrusion

Re: Autolevelling integration for Robo 3D R1

Re: Autolevelling integration for Robo 3D R1

Re: Autolevelling integration for Robo 3D R1

Re: Autolevelling integration for Robo 3D R1

Re: Hangs on the preview at a complex model

Re: Autolevelling integration for Robo 3D R1