Simplify3D User Forum

tkatsouras

The issue that showed up recently is that the printer starts printing at the left most possible point in the X axis which is out of the printing plate. I used and old Gcode file and it prints fine at the center of the plate, so the printer works fine. If you compare both files when the Skirt has neg...

tkatsouras

Hello, Somehow the new prints made with S3D start to print off the plate at minus X location, I went back to a previous print with the same part I did with S3D and prints fine. Looking at GCODE the failing prints have some negative values on Y on the failing prints even thought the problems shows on...

tkatsouras

Hello, I noticed when I start a new print the filament retracts, I checked the "starting script" it is not there: start.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} G28 G90 ;absolute positioning G21 ;metr...

tkatsouras

The Ultimaker2 plate goes up to 100C the Axiom goes higher, I have the previous model the -XDR which has the same temperature specs as the Axiom, I used to print before with the plate at 100C and the glass plate used to last for months, now I like to print at 115C and the glass does not last more th...

tkatsouras

My choice here is to print thin walls that are smaller than the diameter of the nozzle with one line and get a warning from the S3D software. I also like the option to print thin walls with lines instead of 1 or 2 lines and have infill, that makes the print cleaner, I understand there will be gaps s...

Search found 5 matches

Re: Printer starts printing off the printing plate.

Printer starts printing off the printing plate.

Inconsistant filament feed.

Re: Airwolf axiom

Re: Slicer behavior for thin walled sections